Midea JL 1844S are stainless steel water dispensers network for the office, home or any public place. They provide four (4) stages of filtration and separate glove compartment for storage of filters.
SPECIFICATIONS
- Hot, Cold & Room Temperature Water
- Heating Capacity: 85°C – 4.0L/h
- Cold Water Capacity: 10°C – 2.5L/h
- Total Water Tank Capacity: 4.6L
- Cold Water Tank Capacity: 3.6L
- Cold Water Temperature ≥10 °C
- Cooling Power: 100W
- Hot Water Tank Capacity: 1L
- Hot Water Temperature ≤ 85°C
- Heating Power : 420W
- Ambient Water Output: 1.5L/min
- Applicable Water Pressure: 0.1~0.7 MPa
- Water Leakage Protection
- Allows touch-free delivery of cold water
- Child Safety lock for Hot water Faucet
- Automatic Mode - The sterilization runs in every 24 hours.
- Manual Mode - It is recommended to sterilize manually once a week
- Inclined Operation Panel Easy To Use
- High Flow Rate For Cool And Ambient Water
- Double Safety Device For Preventing Overheat
- High-efficient Compressor Cooling
- High-capacity heating & stainless steel hot water tank
- High Power Stainless Steel Hot Water Tank
- Overheating Protection System
- Filter Life Indicator
- Illuminated Function
- Child Safety Lock
- UV light
- High Velocity
- Filter Information
- First Stage Filter & Life Time PP Filter 3600L
- Second Stage Filter & Life Time Pre Active Carbon Filter 3600L
- Third stage filter & Life Time UF filter & 5400L
- Fourth Stage Filter & Life Time Post Active Carbon Filter 3600L
- Voltage: 220 - 240 Volt
- Net Weight: 18 kg
- Gross Weight: 21 kg
- Product Dimensions (W x D x H): 310 x 360 x 1040 mm
- Package Dimensions (W x D x H): 358 x 396 x 1120 mm
- Available in Black
WARRANTY
- Standard warranty: 2 Years
FAQ
Water dispensers with a cooling fan operate less efficiently compared to those with a compressor which can lower the water temperature to 6 degrees. This difference is also evident in terms of cost and durability. Compressor dispensers vary depending on the quality and quantity of construction materials used in the compressor (copper or aluminum) and the type of coolant.
It is essential for proper operation, that the coolers are placed at a safe distance from electrical appliances that emit heat as well as areas of permanent exposure to sunlight (such as windows or outdoor areas). The compressor in the coolers requires adequate space for smooth operation. Unhindered air circulation around all coolers is also necessary.
- Floor standing water coolers with bottles
- Desktop water coolers with bottles
- Floor standing plumbed in water coolers
- Desktop plumbed in water coolers
When it comes to dispensing water, coolers have separate tanks for cooling and heating water. Due to higher demand for cold water in the summer months, there may be a slight delay in cooling. The capacity of each tank determines the amount of cold/hot water the coolers can provide.
It is a common practice for individuals or transport companies to transport coolers horizontally, especially for floor-standing coolers with packaging exceeding one meter in height. This method of transport requires the coolers to be kept out of operation and in a vertical position, for at least 72 hours before use.
-600x600w.jpg "HOT TANK YL 1844S EXTERNAL HEATING")
-600x600w.jpg "HOT TANK YL 1844S EXTERNAL HEATING")
-600x600w.jpg "FLOATER JL 1844S")
-600x600w.jpg "FLOATER JL 1844S")
-600x600w.jpg "DISPLAY PANEL SUPPORTER JL 1844S")
-600x600w.jpg "DISPLAY PANEL SUPPORTER JL 1844S")
-600x600w.jpg "DRIP TRAY COVER ASSEMBLY JL 1844S")
-600x600w.jpg "DRIP TRAY COVER ASSEMBLY JL 1844S")
